NORDSAT Nätverkstestare
NORDSAT Nätverkstestare
Nätverksverktyg

NORDSAT Nätverkstestare

399,00 kr inkl. moms

  • Network cable tester setFor testing CAT 5/6 network and ISDN connections
    • Has RJ11, RJ12, and RJ45 sockets
    • Checks lines for short circuit, wire reversal, and cable defect
    • Remote unit with integrated LED display for 8 individual cores.

Alltid Fri Frakt!

  • Check Mark 100% Nöjd Kundgaranti
  • Check Mark Enkla Returer
  • Check Mark Säkra Betalningar
Garanterat Säker Checkout
  • Visa Card
  • MasterCard
  • PayPal
Artikelnr: 14-N7055 Kategorier: , Etikett:

NORDSAT Nätverkstestare

  • Network cable tester setFor testing CAT 5/6 network and ISDN connections
    • Has RJ11, RJ12, and RJ45 sockets
    • Checks lines for short circuit, wire reversal, and cable defect
    • Remote unit with integrated LED display for 8 individual cores
    • Power supply is a 9 V block (not included in delivery)
    • Incl. 2x BNC > RJ45 and RJ45 > RJ45 adapter cable; 1x BNC > BNC and 2x RJ45 > RJ11 plug
    • Protective Hardcase included in delivery
Vikt0,8 kg
Färg

Svart

Specifikationer

  • The tester helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.The set consists of two parts – the master and remote part (terminator) – that are used at the opposite ends of the tested cable. The FUNC button allows to choose one of two available modes. After plugging in the RJ-45 connectors of the cable to the adequate sockets of the main device and the terminator, and switching on the test, every wire is tested separately. In the case of FTP cable the testing also includes proper connection of the screen. The second mode (manual) is triggered by pressing and holding the FUNC button for about 2 seconds. To test next wire one has to press each time the FUNC key (for a short time). The results are shown by glowing LEDs.

    The tester consists of two parts:

    • main part equipped with switch, LEDs, RJ45 and R11 sockets
    • auxiliary part (terminator) equipped with LEDs, RJ45 and RJ11 sockets
    Battery is not included.

     

Frakt information

Leveranstid 1-3 dagar